String level and hammer level

[Jon Page]

A great tool! I bought a couple, one for every tool box and around the shop.

You can't get too much of a good thing.

Jon Page

At 05:38 AM 4/14/98 -0600, you wrote:
>
>	Jim,
>
>	Thank you for such a thorough description of levelling strings and
>hammers.
>	Concerning the 1/8" and 1/4" strips of sandpaper: Chris Gregg has
>mounted these strips in an ingenious little block which makes their use
>foolproof and keeps them from slipping off the hammer.
>	Chris is making these available to technicians. You can contact
>him at:
>		cgregg@CADVISION.COM
>
>	Ken Burton "Doctor Piano" Calgary Alberta
>
>