Lance Lafargue wrote: > Dear Liszt, > Over the years I have tried to find a way to stop the excessive ringing in > Baldwin 243's. I've had several this week and it's on my mind again. Most > of the ringing comes from the bass and I have many times replaced the felt > and increased the damper follow with minimal effect. I use the bass > dampers with the offset backing which allows a longer damper to be > installed without the hammer hitting them. I've installed the shorter ones > too. I don't know of any supplier who offers anything that is pre-made that > works better. Do I have to make 'em? What works. Some of these pianos > are really bad. I know that at some point you reach the point of > diminishing returns and cannot go too big/long. Help please. Thanks!!! > Lance Lafargue, RPT > New Orleans Chapter > Covington, LA. > lafargue@iamerica.net -------------------------------------- Lance, Have you tried mass-loading the heads per my Journal article of a year or two back? I've not tried it on a 243, but it has worked on quite a few other larger uprights. -- ddf
This PTG archive page provided courtesy of Moy Piano Service, LLC