Renner Lite Hammers (was Let's talk about light....

[David C. Stanwood]

>Date: Thu, 13 Nov 1997 20:43:34 -0500
>From: nhunt@jagat.com (Newton Hunt)
>Subject:...)
>
>Hi, Ed,
>
>THose are light hammers.  Get some 1/8" solder and drill a hole or two
>through the molding and insert the solder in the holes then try the
>tone...
>	Newton

Newton,

I think it would be more practical for Ed to use the Yamaha clip-on shank
weights to mock up an extra gram of strike weight.  

David Stanwood