plate spraying!

[David ilvedson]

> Date:          Sat, 29 Mar 1997 17:02:48 -0500
> From:          jptuner <jptuner@asan.com>
> Subject:       plate spraying!
> To:            pianotech@byu.edu
> Reply-to:      pianotech@byu.edu

Hey, if ya just leave the strings and pins in when ya spray ya
don't have to worry about the pinblock...

David ilvedson, RPT (with tongue firmly planted)
Pacifica, CA

> hello all,
>            I have been wondering when spraying plates with spray paint,
> can the oils from the paint effect the pin block,of course when i
> restring i always spray the plate to make it look good, the plate does
> not come out ,these are restringing jobs in homes or my shop, i have
> restrung close to a 100 or so pianos and have not had a problem yet.But
> does it or could it effect the pin block.PS I have never used a clear
> coat on the finish, but my results are very pleasing,i will try the
> clear on my next job.
>                             jptuner!
>
>