There are ways to take a Wurlitzer action out and there are ways .... How did you go about removing the action? The important thing is after you loosen the action brackets, to secure the stickers toward the back of the piano with a tool made for this purpose from Schaff or a small dowel. Schaff's is easier, as sometimes you have to insert the rod and then finish assembling it. Secure the rod with rubber bands or whatever and out it comes. Just reverse to replace. Should come out & go back without needing regulation due to the removal. Better luck next time. Les's comments are right on target: check it out first. Who of us hasn't been "caught"? Wally Wilson
This PTG archive page provided courtesy of Moy Piano Service, LLC