Les I don't agree its important to measure the weight of every hammer. As there is little you can do to alter the weight of individual hammers once you have decided to purchase your particular set. Of course you can re-lead the keys, altering the down weights and up weights will not only affect repition, but the voice as well. Also, if we want to be really picky with period pianos. The hammer shank has to be taken in to consideration, some early Brimmead pianos had oval shaped hammer shanks, with nice little nobly bits behind the hammer head. The shape and weight of hammer shanks also plays a part in the colour range of a pianos tone this is due to the pianoist ability to bend the shank when playing. This will excite different harmonics. Regards, Barrie. In article <Pine.BSI.3.95.970321182103.23080A- 100000@buffnet11.buffnet.net>, Les Smith <lessmith@buffnet.net> writes >Ah, now you're bringing another factor, voice, into the matter of >hammer selection. It's certainly worthy of consideration, and in the >process, complicates things somewhat. The weight of the hammer-- >measured in grams--is of comnsiderable importance to the touch of >the piano. If we're restoring an instrument where we want to pre- >serve the original touch, measuring and matching up the weights of >both the original hammers and the replacements becomes of primary >importance. And it's not just a matter of weighing and matching up >the first and last hammer of each section, it a matter of weighing >and matching each hammmr. All eight-eight. Now you want to add to >that matter of the "voice" of the hammer. Different moldings-- >walnut, mahogany, birch, etc--have different weights, and as the >density of different felts vary, so too will their individual weights. >So the wieght of a particular hammer depends upon BOTH the type of >wood used for the molding and the density of its felt. From a touch >standpoint, it really doesn't matter whether the hammer's weight is >the result of a heavier molding and a less dense felt, or a lighter >molding and a denser felt, but the such a selection can have a big >impact on the voice of a particular hammer. In other words, it might >be the correct weight, but the voice is all wrong. Kind of like your >making that Bechstein sound like a Yamaha! Therefore, not only the >weight of the hammer is important, but how that weight is achieved >in terms of molding-weight/felt density must be considered, too. > >Les Smith >lessmith@buffnet.net > >On Fri, 21 Mar 1997, Barrie Heaton wrote: > >> Yes, your on the right tracks. Les and Horace had described density to >> you very well. May I add though, the customers requrements should be >> taken in to account. I misinterpretered a customers request on his >> Bechstine he said it had lost its "umph" my neighbour has a lot of >> "umph" His neighbour had a brand new Yamaha which I tune. Which is >> very bright and lovely bass. So I assumed he wanted a bright piano. >> Boy was I mistaken it took me six months and a loot of visits to tone >> those hard hammers down. What he meant by umph he wanted a nicer bass >> but he still wanted his Bechstein sound which is a soft mellow treble >> compared with a Yamaha. >> >> Some of the Bechstein Grands start at gage 13 at the top so a dense >> hammer is not necessary to produce a quality sound. That's why >> personally on grands around the 1920 and down. I tend to go for re- >> covering rather than replacing, it is a bit like buying a set of pre- >> hung hammers the re-coverer matches the original felt so all you'll have >> to do is replace the rollers and re-centrer the hammers plus they are a >> little bit cheaper. >> >> Hope this is of some help. >> >> Regards, >> >> Barrie. >> >> >> >> In article <09151041200001@DEBCOM.BE>, Peter Kestens >> <KESTENS.P@Debcom.be> writes >> >PETER KESTENS >> >Het Muziekinstrumentenatelier >> >BELGIUM >> >KESTENS.P@Debcom.be >> > To Barrie Heaton, >> > >> >Could the density of the felt being of any importancy? The higher it is, >> >the more it weights? >> > >> > >> >> >> >> >> >> -- >> >> Barrie Heaton | Be Environmentally Friendly >> URL: http://www.airtime.co.uk/forte/piano.htm | To Your Neighbour >> The UK PIano Page | >> pgp key on request | HAVE YOUR PIANO TUNED >> >> > > -- Barrie Heaton | Be Environmentally Friendly URL: http://www.airtime.co.uk/forte/piano.htm | To Your Neighbour The UK PIano Page | pgp key on request | HAVE YOUR PIANO TUNED
This PTG archive page provided courtesy of Moy Piano Service, LLC