Danny, Les, and Horrace, Thanks for the input. Danny, your analysis of hearing and hearing aids was great. Les and Horrace, I will definitely use a softening solution as opposed to needles. All the flanges ARE plastic. Most of the damper flanges have been replaced, and the El's have been replaced. The hammer butt flanges held up to the rigors of shaping, but I don't want to put any more stress on them than is necessary. The plastic wip flanges are another story. They are so brittle I was unable to reg lost motion without having them break on me (several hammers were sitting up off the rail). The wip flanges will ultimately have to be replaced. (Don't ask what I temporarily did to reg the lost motion without turning sticker dowels - maybe you can guess!) Thanks again! John Piesik, RPT
This PTG archive page provided courtesy of Moy Piano Service, LLC