Warren, Treble plate screw is in the proximity of the back of the keybed. It is the screw on the lower treble corner of the plate, 'below' the bridge. I support it with a length of wood to accomodate a pipe clamp to secure the plate while the screw is removed during the drilling/bolting process. Jon At 10:35 PM 3/6/97 -0800, you wrote: >Jon Page wrote: >> >> Warren, >> Look for about 1/4 tone pitch raise. Tune it later. > >Thanks, Jon, my plans pretty much parallel what you said. I've done a >couple of these jobs, but one of them was pretty hairy! Describe this >treble plate screw, are they the ones under the strings? Support it >how? > >Warren > >-- >Warren D. Fisher >fish@communique.net >Registered Piano Technician >Piano Technicians Guild >New Orleans Chapter 701 > > Jon Page Harwich Port, Cape Cod, Mass. (jpage@capecod.net) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC