---------- > From: Horace Greeley <hgreeley@leland.Stanford.EDU> > To: pianotech@ptg.org > Subject: Re: Hitch pin adjustment > Date: Wednesday, July 23, 1997 10:36 AM > Certainly, make your measurements (and look for 1 to 1.5 degrees > deflection), but then make sure that the hammers still work, etc. > > More later, if needed. > > Best of luck... Wondering how deflecting bearing behind the bridge (raising or lowereing accujust in Baldsin) would affect how the hammers would work. Richard Moody >
This PTG archive page provided courtesy of Moy Piano Service, LLC