Paul, It's my understanding that Baldwin has a special gauge for this adjustment which they will send to you. I'd contact Kent Webb or someone in his office. Avery >List: I was asked to help a fellow technician with the adjustment on a >new Baldwin with the Accujust hitch pin system. What is the best >method for doing this, and what equipment (downbearing gauge, etc.) do >I need for doing the job? He has been trying to clear up a group of >notes on a SF Baldwin in the high treble which won't sound clear. He >has tried everything he can think of, including leveling the strings, >tapping the strings down on the bridge, needling the hammers, etc. He >mentioned that he has been fooling with the adjustment on the hitch >pins, so I'll have to reset them. > When I return from Orlando, I'll be working on this piano, so I'm >trying to find out what I can do to correct the situation. Any words >of wisdom will be much appreciated. > Paul McCloud, RPT > San Diego ___________________________ Avery Todd, RPT Moores School of Music University of Houston Houston, TX 77204-4893 713-743-3226 atodd@uh.edu __________________________
This PTG archive page provided courtesy of Moy Piano Service, LLC