Next Quiz

David ilvedson ilvey@a.crl.com
Wed, 29 Jan 1997 17:41:02 +0000


> Date:          Wed, 29 Jan 1997 08:56:48 -0800 (PST)
> From:          ron_and_lorene@juno.com (Ronald R Shiflet)
> Subject:       Next Quiz
> To:            Pianotech@byu.edu
> Reply-to:      pianotech@byu.edu

Front bushing cloth too far in the mortice?

David ilvedson, RPT
Pacifica, CA


> 	I went out as promised to work on my customers brand new grand
> piano.  She complained that A below middle C sticks.  I tired and tried
> but couldn't make it stick.  I played slow, I played fast,
> soft...hard...nothing.  I even tuned the piano but noticed nothing.  As
> I went to leave I told her that I couldn't find it.  Then she said that
> as soon as I left it would start sticking again.  I felt guilty so I
> looked again.  Then I felt a slight heaviness when I slowly pushed the
> key down.
> 	I decided to find out if it was in the action or the keybed.  The
> action had no apparent discrepancies.  I decided it was in the key so I
> tested to see if it was in the balance hole or the front mortise.  I
> lifted up at the key and the balance hole felt fine so I pushed the key
> down slowly and then it felt fine.  I was really puzzled so I took the
> action stack off from the key frame.  What did I find?
>
> Ron Shiflet
>
>




This PTG archive page provided courtesy of Moy Piano Service, LLC