>All you fellows with foot switches....throw the darn thing away, but save >the wire. Get a new switch such as the one Rayburn uses on the tuning >lever. Get a magnet about an inch square or so and epoxy it under the >switch. Now you can just plant the thing anywhere there is iron and use >your finger instead of your foot. Ive used one for a long time and it >works great. >Dick RPT > > All you people, all those devices....after following tuners using these things(particularly in a concert situation), it's becoming clearer now as to why a pianist says " it was just tuned yesterday but something isn't quite right". A little too much attention to whats going on around the job at hand? Just my opinion! (;~) Aurally yours, Bob Moffatt Calgary, Alberta Canada ll/rm
This PTG archive page provided courtesy of Moy Piano Service, LLC