>Jerry, > I have one of the files Bill sells. It works great, much faster >than anything else I've tried, and yes it even works well when the plate >is still in the piano. The radius may or may not be to your liking (I >think Bill said it was a 1/16" radius), but you can fudge it to get a >slightly narrower tip on the V bar. >Steve Brady, RPT >University of Washington >Seattle, WA Steve, Thanks a million for the information. Hamburg specs for the V-bar radius are 1.6mm (0.0629 inches), which is awfully close to 1/16 (0.0625 inches). I'm gonna have to try one of these. Jerry p.s. nice work on the Journal.
This PTG archive page provided courtesy of Moy Piano Service, LLC