Sticking Styrene flanges

[Ron Torrella]

On Sun, 21 Jul 1996 Barrie Heaton wrote:

> The centre pin lubricant you refer to,  do you have to remove each
> hammer to apply it or is there some applicating device which allows you
> to keep the parts in place.

If your government allows you to possess a hypodermic needle and syringe,
you can use that to get the lubricant to the bushing without having to
remove the flanges from the rail.  The only exception being in cases
where the flanges are too close together.

Ron Torrella				Check out The Piano Page at:
Asst. Piano Technician	      http://www.prairienet.org/arts/ptg/homepage.html
University of Michigan  	Provided in cooperation with Prairienet.