>The Piano is a 14 year old Young Chang Grand Model G-185. The hammer moves >back toward the rest position just fine until about the last 3/4 inch. Then >slow considerable. I have checked all pivit points, center pins, >bushings,ect. Everything is fine...Am I right in assuming that I need to >remove some lead weight from the key? And if so. Do you just drill out some >or how do you proceed... > >Dick Day >Marshall, MI Before you undertake any attempts to modify the key leads, Dick, would you please clarify exactly which pivot points, centerpins, bushings, etc. you did check, and the method(s) of how you checked them? Keith A. McGavern, RPT kam544@ionet.net Oklahoma Baptist University Shawnee, Oklahoma, USA
This PTG archive page provided courtesy of Moy Piano Service, LLC