Before relocating capstans you must first determine if this will solve the problem . To do this, make an adjustable capstan screw and try various positions, taking standard measurements at each position. The adjustable capstan can be made as follows: 1. Remove the capstan from a sample note 2. Take a piece of hardwood about 3/8 x 3/8 x 1-1/4" and mount a drop screw near one end 3. Set this over the capstan location and adjust drop screw for height 4. Slide the wooden block in and out, taking measurements all the while, and decide if there is a better location. 5. If this doesn't work try something else. Bob Hohf
This PTG archive page provided courtesy of Moy Piano Service, LLC