On 5/8/2012 1:31 PM, erwinspiano wrote: > After using the TB 50 for bridges and sound board panel glue up...I,m > sold. I find the 50 to be way less thermo plastic than the assembly 65. > I glued up to panels one with each glue.The 65 set up way faster than > even Bolduc pva. When it dried I belt sanded of the residue and it gums > up &gets a bit sticky. The 50 gives more work time especially on getting > plank alignment and the stuff dries hard as hide glue and sands of > lickety split. Interesting. I haven't compared sanding results, and thermoplasticity. On a test paper, the 65 is more brittle than the 50, which is more brittle than the TB original. > Learning curve still in process > Dale Indeed. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC