Hi Jeff, on occasion I've had to chamfer (bevel) the back/lower edge of the tray for clearance. It's easy enough to do on the table saw, and I can send you photos... if this is the question you were asking. Mark Cramer, RPT Brandon University On 24/03/2010 10:00 AM, Jeff Farris wrote: > Hey List, > > Has anybody out there ever replaced a back action which has a tapered > tray. In other words, the tray measures 4mm wider (front to back) in > the bass than in the treble. The flanges are glued on top and THEY, > TOO are tapered. The flange length tapers by 4mm from bass to treble. > I'm finding that the Renner instructions, don't really cover this. Any > suggestions on locating the tray pivot pins? > > Jeff Farris > Piano Technician > School of Music > UT Austin > jfarris at mail.utexas.edu > 512-471-0158 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20100324/3df5d5e5/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC