Hey Alan, Naphtha shouldn't hurt the satin lacquer if it's cured. Usual disclaimer applies, try it in an inconspicuous place first. DP Dale Probst, RPT Registered Piano Technician Midwestern State University -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of reggaepass at aol.com Sent: Monday, March 01, 2010 12:27 PM To: caut at ptg.org Subject: [CAUT] Cleaning up..., part 2 Yamaha recommends using naptha to remove adhesive residue from their high gloss poly dampers, and this has worked well for us. What would clean adhesive and writing (!) off of satin lacquer finished dampers (such as Steinway)? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20100301/8ae4fe2c/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC