Hi Jeff, I just rebushed a guide rail. The 3/16" transfer punch worked to punch out the old ones. They were countersunk on both sides. The width of cloth I used was about 21/32" (ie a smidge over 5/8"). Glue not necessary. Alan McCoy ________________________________ From: Jeff Farris <Jfarris at mail.utexas.edu> Reply-To: CAUTlist <caut at ptg.org> Date: Wed, 23 Jun 2010 12:32:22 -0700 To: CAUTlist <caut at ptg.org> Cc: <tseay2 at austin.rr.com> Subject: [CAUT] Damper guide rail holes Hi List, Anyone know what size drill bit to use for drilling new damper wire guide rail holes for a Steinway B? Or where to find out? Thanks, Jeff Farris Jeff Farris Piano Technician School of Music UT Austin jfarris at mail.utexas.edu 512-471-0158 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20100623/5476c9a6/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC