In a message dated 6/1/10 3:58:07 PM, dempsey at marshall.edu writes: > am re-knuckle-ing a set of grand shanks. The new parts are of Able > manufacture and have a pencil line on each. > > Does this line face the flange or the hammer? > > Paul 'usually' the line faces the flange.....but really more important is that the line faces the same way on ALL the shanks for eveness of touch. You can test the nap of the knuckle and place the thingees so that the nap runs 'toward the hammer...this will make for a smoother return and more positive power stroke. good luck. :-) Jim Bryant (fl) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20100601/2d186308/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC