Thanks, Jon. This was my first inclination for reinforcement, but like Gerry's plate idea if there's clearance. -Paul -- Paul Milesi, RPT Staff Piano Technician Howard University Department of Music Washington, DC > From: Jon Page <jonpage at comcast.net> > Reply-To: <caut at ptg.org> > Date: Wed, 11 Aug 2010 10:18:43 -0400 > To: <caut at ptg.org> > Subject: Re: [CAUT] Sostenuto Trap Lever Repair > > Once glued, a few judiciously placed screws should reinforce the lever. > -- > > Regards, > > Jon Page >
This PTG archive page provided courtesy of Moy Piano Service, LLC