Fred Sturm wrote: > Hi Ron, > It's based on an uncut set of hammers. I had the same thoughts. I'm > not sure how they came up with the time, but it does take at least > somewhat longer than individual hammers, as none wanders around and goes > in the "end grain." Kind of like how wood acts in absorbing liquid. They > are probably overdoing it to be sure. Or maybe someone cut a set open at > intervals, and determined what the safety range would be. > Regards, > Fred Sturm More likely the minimum cycle time to full saturation. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC