Metric wood screws? hmmm . . . . although I suppose there are such things, I have never had a problem interchanging them. I have used www.boltdepot before as well - very quick service, and a good selections of bolts and screws. Don Mannino _____ From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of reggaepass at aol.com Sent: Wednesday, June 03, 2009 9:20 AM To: caut at ptg.org Subject: Re: [CAUT] Yamaha grand screws too short? ...and mighten it be metric? Alan Eder -----Original Message----- From: Don Mannino <DMannino at kawaius.com> To: caut at ptg.org Sent: Wed, 3 Jun 2009 7:43 am Subject: Re: [CAUT] Yamaha grand screws too short? Maxim, Have any good hardware stores in town? Buying screws is a pretty basic activity. . . If the next size screw is too long, trim the tip on a grinder to keep it from bulging the finish on the top side of the lid. It's usually called a lid lock bar, or a lid stiffening bar. Don Mannino -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org <mailto:caut-bounces at ptg.org?> ] On Behalf Of maxpiano Sent: Monday, June 01, 2009 5:54 PM To: caut at ptg.org Subject: [CAUT] Yamaha grand screws too short? A church I serve has had the piece that holds the lock to the lid on their Yamaha C7 pull loose. (I know, I know--after 50+ years tuning, I should know the name of the piece. The book on nomenclature is next on my list to get). I have never run up against this before. But the screws (2 7/16" flat head brass--#12?) do not protrude much into the lid and I'm wondering how well my standard fix for stripped screw holes (leather lining the hole) will hold unless I can find a slightly longer screw. Is any such screw available -- perhaps 1/8" longer? I fear the point pricking the finish of the other side if I go too long. Bill Maxim Maxim _____ Shop Inspiron, Studio and XPS Laptops at Dell.com <http://pr.atwola.com/promoclk/100126575x1222616459x1201464730/aol?redir =http:%2F%2Fad.doubleclick.net%2Fclk%3B215218145%3B37264238%3Bd> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20090603/c326b81d/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC