I'm no expert but if you drill the holes for the precise reason to line up the plate in the exact same spot when re-installing, wouldn't you at that time adjust the plate to line up with the locator holes? What's the point, otherwise. David Ilvedson, RPT Pacifica, CA 94044 Original message From: "Jeff Farris" To: "College and University Technicians" Received: 2/12/2009 6:26:48 AM Subject: [CAUT] Plate locator holes OK, heres a good question... Do you drill plate locator holes before taking tension off the strings or after? And why? (When putting a plate back in, if the holes dont line up exactly, could it be that something changed slightly since you drilled them before de-stringing?) Curious, Jeff Farris Piano Technician School of Music UT Austin jfarris at mail.utexas.edu 512-471-0158 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090212/1d91727b/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC