[CAUT] string level

[Joe Goss]

The foot would be ruined.
  ----- Original Message ----- 
  From: Chris Solliday 
  To: Ed Sutton ; caut at ptg.org 
  Sent: Sunday, April 26, 2009 7:37 PM
  Subject: Re: [CAUT] string level


  in which case maybe you could just glue a magnet to the mother goose level.
  Chris Solliday
    ----- Original Message ----- 
    From: Ed Sutton 
    To: caut at ptg.org 
    Sent: Saturday, April 25, 2009 6:29 PM
    Subject: Re: [CAUT] string level


    Fred-

    What about inverting it so that it hangs below the strings into the action cavity?

    Ed S.
      ----- Original Message ----- 
      From: Fred Sturm 
      To: caut University Technicians 
      Sent: Saturday, April 25, 2009 4:08 PM
      Subject: [CAUT] string level


      There are logistical problems using the string level Joe Goss sells: unisons next to struts, and in quite a few cases the dampers are so close to the capo that the level won't fit. I've fooled around with other designs, and here is my latest, which I like quite a bit.

      A piece of 1/8" x 1/2" steel is the basis. Long enough to hold the level above the capo. The level is cut from one of those cheap "two-way" levels used to level refrigerators and whatnot. I attached the level with a screw (I'll probably glue it). THe hard part is machining the bottom of the steel to be square and flat, but I did it with careful hand work using a file and a stone. Then I added a strong magnet to the back for stability (it may be too fat for some damper/capo gaps, so I'll find a narrower one some time).

      The magnet seems like a great idea one initial trial. If the center string is high, you need to stabilize it so it won't rock (while plucking), but it holds nicely to the strings and seems to give a very good reading. I may need to calibrate how strong the magnet is. At the moment, it is just taped in place temporarily.

      Anyhow, thought I'd share this, as it seems like a good set of features for those so inclined. Please feel free to make any use of any or all  the ideas included.

       


      P4250001.JPG

       




      P4250006.JPG

       






      Regards,
      Fred Sturm
      University of New Mexico
      fssturm at unm.edu





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090428/c77e9c2f/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 24201 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090428/c77e9c2f/attachment-0002.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 17519 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090428/c77e9c2f/attachment-0003.jpe>