Richard Adkins wrote: > > /If you're not taking the plate out/, then essentially I'd think you > could mark (choose your method) each accujust pin where the strings are > now, BUT follow the order Baldwin requires for putting bearing on the > strings as posted by Ron N, doing the bass strings last. Or am I wrongk? The first step before tear down, is to ascertain what the bearing is in all sections and decide if you really want to replicate it or not. > The only caveat is that you > cannot really make adjustments to the total bearing once you've done the > whole piano, as it is cumjulative. Sure you can, if you proceed cautiously, in small increments, and keep an eye on the soundboard crown. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC