I don't know if this has been said or not, but the Nossaman method of drilling the pin deeper than normal and using a laminated cap is extremely effective in keeping the top of the hole firm (laminated). Using CA glue and filling the hole may negate the advantage of the deeper hole by filling it, allowing the bottom of the pin to touch bottom, which has some negative effects. Jim Busby -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090421/b2214be7/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC