On Apr 6, 2009, at 11:33 AM, DCyr141833 at aol.com wrote: > Also am finding that it works ok on new action part centers that > have 0 grams friction - hammer flanges and whippen flanges. This statement raised my eyebrows a bit, as it certainly doesn't make sense based on my previous experience. So I tried it this morning on four hammershanks (Abels). I didn't have any at 0 grams, but all four were at about 1 gram. I applied a drop to each side. Three hours later, all four are at 0 grams: the flange flops nicely in the breeze (hold the shank and swing the flange, and it goes back and forth a couple times). So I would strongly recommend against this application, myself. Regards, Fred Sturm University of New Mexico fssturm at unm.edu -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090408/e49b5f49/attachment-0001.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC