Check for loose knuckles.. Dan Dallas On Oct 7, 2008, at 11:06 AM, Andrew Anderson wrote: > We had the Long sisters Duo (great artists, don't miss them if you > have the opportunity) here at TAMIU. During the course of their > practice and the pre-concert tuning (done minutes before) some > clicking developed in the hammers. I held adjacent notes down tight > to eliminate slapping of the front rail. No joy. I put a finger over > the damper and softened the upstop. That did seem to make a little > difference. I checked, the rail is in place with plenty of felt > apparent. > > I've had to reglue a few dampers including one after their practice so > I'm suspecting the hammer-shank glue joint. Would this be a candidate > for a little vinegar to reactivate the glue and tighten the joint? Or > would it be preferable to simply remove the worst hammers, knurl the > shank and re-glue? > > Andrew Anderson >
This PTG archive page provided courtesy of Moy Piano Service, LLC