Teflon all the usual suspects... to reduce wear and excessive friction. Quick & easy... dan On Nov 26, 2008, at 9:31 AM, A440A at aol.com wrote: > >> Our music department just received four new Steinways: one D, two Bs, >> and an A. Other than the obvious tuning and voicing, what immediate >> prep would you suggest? > > Check the pinning in the hammer line, just so you know what happens > over the first year or two. Also, relieve the excessive side pressure > the damper wires are exerting on the guide felt, or you will have a > bunch of offset dampers in the near future. > Regards,, > > > > ************** > Life should be easier. So should your homepage. Try the NEW AOL.com. > (http://www.aol.com/?optin=new- > dp&icid=aolcom40vanity&ncid=emlcntaolcom00000002) -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 1210 bytes Desc: not available URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20081126/91e26c4f/attachment.bin>
This PTG archive page provided courtesy of Moy Piano Service, LLC