[CAUT] damper guider rails

[A440A at aol.com]

<< >From where do I measure to align the rail back properly so the dampers 
will be in the right place? >>

You will have to take the best average placement.  Some holes will be off 
center in either direction.  Usually, the lower proximal edge of the rail is 
flush with the edge of the soundboard. 
     Sometimes, it is easier to make new rails if the bridges are 
considerably different.  
Good luck, 
 
Ed Foote RPT 
http://www.uk-piano.org/edfoote/index.html
www.uk-piano.org/edfoote/well_tempered_piano.html
 <BR><BR><BR>**************<BR>Start the year off right.  Easy ways to stay 
in shape.<BR>     
http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489</HTML>