[CAUT] Mason & Hamlin agraffes

[Jon Page]

>  It needs to be perfectly still, preferably at a drill press to ream 
>correctly.


Don't use a reamer in a drill press, it can get ugly fast. Delicately spin
the reamer between your fingers to dress the hole.

I reamed agraffes on one M&H that the reamer tore right into the brass
even with light finger pressure so and I had to be extra careful with 
the reamer.
-- 

Regards,

Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20080107/0d7e0421/attachment.html