[CAUT] CA glue app. to bridge pins

[Marcel Carey]

Hi Joe,

There is no simple answer to your question. We all ask ourselves the same. You might want to have a good look in the archives where you'll find probably about 1,000 or so posts on this particular subject. Just don't expect to get to the truth easily.

Marcel Carey, RPT
Sherbrooke, QC
----------------------------------------
> To: caut at ptg.org
> From: jwpiano at earthlink.net
> Date: Sun, 6 Jan 2008 23:25:53 -0500
> Subject: [CAUT] CA glue app. to bridge pins
> 
> Hi list,
> Regarding some of the recent submissions about applying CA glue to the 
> bridge pin to eliminate false beats, I was wondering if this treatment 
> could be compared to applying CA glue to tuning pins?  It seems that 
> from reading some calls and responses that this may be oversimplifying 
> the physics of the bridge/pin, but is an origin of false beats loose 
> bridge pins?  Also,  are bridge pin holes drilled to a specific depth 
> to accept the whole length of the pin or are they drilled like tuning 
> pin holes, allowing space at the bottom.? I've been very, very curious 
> to understand the origin of false beats and how to deal with them 
> certainly.
> Thanks in advance for any input,
> Joe Wiencek, RPT
> working at New York University
> jwpiano at earthlink.net
> 
> tel: 551 358 4006
> 

_________________________________________________________________
Voici la Cité @ Live! Faites une visite guidée!
http://www.tonadresselive.ca/?icid=LIVEIDFRCA006