[CAUT] Baldwin sustain pedal return spring

[Ken Zahringer]

Hey, David,

I can¹t speak for anyone else, but for me Baldwin parts was a pain in the
backside before the bankruptcy.  I would take some measurements from the
trap lever and keybed and make a trip to Ace Hardware.   If you have trouble
with spring noise, you can always weave a strip of bushing cloth up one side
of the spring.

Regards,
Ken Z.


On 9/21/06 11:18 PM, "David Ilvedson" <ilvey at sbcglobal.net> wrote:

> I have a Baldwin SF grand...sorry, forgot to get serial number.   The return
> spring from the bottom of the keybed to the lever directly above the sustain
> pedal rod is missing.   Obviously I can make something work, but, is Baldwin
> parts still in existance?    Quit laughing...    I'm actually thinking about
> installing some key leads in the lever and it would do the same thing with no
> possible spring noise...
> 
> 
> David Ilvedson, RPT
> Pacifica, CA 94044
> 
> 


-- 
Ken Zahringer, RPT
University of Missouri
School of Music

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20060922/b1d4a26c/attachment.html