[CAUT] caut Digest, Vol 1090, Issue 6

[Chris Solliday]

Nope, never have, and I usually never say never. Enco has an arbor press you
can modify for about $20.00. And just to catch up with all your posts David
Targeting the StikeWeight to match the existing leading is OK if the
StrikeRatio and Strike Weight marriage is close enough. You can and will
have to either float one of the key weight factors or friction. So that's
like target the DownWeight   float Upweight, BalanceWeight and Friction;
target the UpWeight float the downweight, balanceweight and friction and so
on. OR control Friction 8-12 grams, target Balance Weight and DownWeight and
float the Upweight but make sure it is over 26g OR there are lots of
variations that work in this box. Check out the Team Pianotek Hands On Grand
Action Renovation class at CA State in Feb 07 in SF for more.
The important thing is to start thinking in weight terms and playing with
the concepts. You are obviously on the right track, good luck.
Chris Solliday
----- Original Message ----- 
From: <caut-request at ptg.org>
To: <caut at ptg.org>
Sent: Tuesday, September 05, 2006 3:57 PM
Subject: caut Digest, Vol 1090, Issue 6


> Send caut mailing list submissions to
> caut at ptg.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://www.moypiano.com/resources/#archives
> or, via email, send a message with subject or body 'help' to
> caut-request at ptg.org
>
> You can reach the person managing the list at
> caut-owner at ptg.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of caut digest..."
>


----------------------------------------------------------------------------
----


> Today's Topics:
>
>    1. Re: arbor press (David Ilvedson)
>    2. Re: arbor press (David Ilvedson)
>    3. swadging hammer leads (David Ilvedson)
>    4. Re: arbor press (Alan Crane)
>    5. Re: arbor press (Jim Busby)
>    6. underlever lead pliers (David Ilvedson)
>    7. Re: arbor press (kpiano)
>    8. Re: arbor press (Ken Zahringer)
>    9. Re: arbor press (Thomas Seay)
>   10. Re: underlever lead pliers (Joe And Penny Goss)
>   11. Re: underlever lead pliers (Jeff Tanner)
>   12. Re: arbor press (Jeff Tanner)
>


----------------------------------------------------------------------------
----


> _______________________________________________
> caut list info: https://www.moypiano.com/resources/#archives