Mr. Lafarque, I've had this same problem on an almost great American make common at All [american make] Schools. Andrew Anderosn At 06:05 PM 7/8/2006, you wrote: >I don't imagine many Universities have Estonia's, but I was >wondering if any of you have worked on them. I have two here and >when leveling strings/hammer fitting, I've noticed that it looks >like agraffe holes are not drilled at exactly the same height, or on >same plane (ooo) , or possibly the agraffe threaded holes in >the plate are not vertical causing the agraffes to lean. I'm having >a tough time getting strings on a level plane. I've not noticed >this on many other pianos. Thanks. > > >Lance Lafargue, RPT<?xml:namespace prefix = o ns = >"urn:schemas-microsoft-com:office:office" /> > >LAFARGUE PIANOS, LTD > >New Orleans Chapter, PTG > >985.72P.IANO > ><mailto:lafargue at bellsouth.net>lafargue at bellsouth.net > >www.lpianos.com > > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20060710/44a3a2e6/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC