This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi folks, I've had some private correspondence with a few about this, but what the = heck, I'll go public to get a few more opinions. Just wondering how deep you are willing to go with the key dip on a = Steinway D. I'm trying to decide when to sacrifice blow distance for = comfortable dip--or making the dip deeper than I like to eek out more = blow distance. =20 I suppose what it really comes down to is how much difference in power = there would be between 1 7/8" blow and 1 3/4"? Significant? This is a = really big hall (a bit less than 3500 seats), so power is an issue. =20 Right now (with Crescendo punchings) dip is at .401" (my .391 block with = a .010" punching added), blow around 1 3/4" with .030" aftertouch. It = feels a lot better <to me> than when the blow was at 1 7/8", though I = didn't have any complaints when the dip was deeper. I did go back and = read a bunch of stuff in the archives about dip and folks reported that = they didn't have complaints about deep dip, but I don't recall anyone = getting real specific about how deep they were actually willing to go. Thanks for sharing your experience, Barbara Richmond, RPT =20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/61/89/80/c4/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC