[CAUT] pedal pin

[Don Mannino]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Wim,
=20
If you can't swage (swedge?) (i.e., smash with hammer) the pedal to
tighten things up, I'd replace the pedal.  A large pin will be a problem
in the hinge brackets.
=20
Don Mannino

-----Original Message-----
From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org] On Behalf Of
Wimblees@aol.com
Sent: Tuesday, January 11, 2005 12:24 PM
To: caut@ptg.org
Subject: [CAUT] pedal pin



The fluted pedal pin on an older P2 is loose in the pedal. (The pedal
pin is at the end of the pedal, that attaches the pedal to the bracket.)
Anyone know where I can get thicker pins? Or do I need to get a new
pedal?
=20
Wim=20
Willem Blees, RPT
Piano Tuner/Technician
School of Music
University of Alabama
Tuscaloosa, AL USA


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/1a/28/a6/4c/attachment.htm

---------------------- multipart/alternative attachment--