---------------------- multipart/alternative attachment Hi, Mark - You'll find the dags will fit back in place perfectly, even if they - or the keybed - are splintered. Take the time to figure out which one came from which spot and 'dry fit' them in position. Do not clean up the glue or splinters; this will help you to get them back exactly into their previous positions. Reglue one dag at a time. Put some CA on the dag and maneuver it into position; use a rubber mute or two or three wedged under the damper tray to hold it in position. Then, not before, administer a small dose of 'kicker' around the exposed edges of the glue joint. Leave the dag undisturbed for a few minutes while you go on to the next one. Done. Easy! ~ Tom McNeil ~ Vermont Piano Restorations 346 Camp Street Barre, VT 05641 (802) 476-7072 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/09/71/31/dd/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC