This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Wim, Not only will I not blast you for using the stuff, I will say that if you work on Steinway hammers at all, you must use some kind of hardener. Ronsens too. They are designed that way. I like working with these hammers. You can get beautiful tone with them. Takes work. As do any other hammers. Different technique, same result. Alan McCoy -----Original Message----- From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org]On Behalf Of Wimblees@aol.com Sent: Friday, April 25, 2003 9:08 AM To: Pianotech@PTG.org; caut@ptg.org Subject: melting plastic SOT Melting Plastic, SOT, (Slightly Off Topic.) For hammer juice, I use acetone and keytops. I keep this solution in a plastic bottle. I'm no chemist, so how come the acetone dissolves the plastic keytops, but doesn't dissolve the plastic bottle in which it is kept? Wim PS. Before I get blasted for using this stuff in the first place. please be assured I use it very sparingly only on Steinway hammers when I voice. These Steinway hammers are first given a liberal dose of lacquer and lacquer thinner, as per factory specification. I don't use any kind of juice on other hammers. (I keep the lacquer mixture in a plastic bottle too, (a mustard bottle), and it doesn't dissolve either.) ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/f5/12/ff/ef/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC