Hi all- there IS a way to quickly solve action center problems, when the only problem is verdigris. Richard Anderson,RPT, found this some years ago, and I have used it successfully a number of times. Spray "QD electrical contact cleaner" from CRC Industries on the action centers, move the part back and forth, and then go on. I have not found any return of sluggishness, even when the parts were completely frozen. It leaves no visible residue, though I usually spray it outside due to the odor. It doesn't take much, and usually makes the affected center a bit freer than I would like, but it is a perfect solution in cases like this one, where the parts should really be replaced anyway, but the customer doesn't have or want to spend the money. The piano will be playable, the cost is very low, and when some other problem with the parts shows up, (like breakage), you won't be throwing so much of your work away. The QD is available in local hardware stores. --- David Graham <dcgrpt@earthlink.net>
This PTG archive page provided courtesy of Moy Piano Service, LLC