---------------------- multipart/alternative attachment At 04:57 PM 07/13/2001 -0500, you wrote: >Jon..... hope you get this... I THINK I'm putting it in the right spot. I >know that 1:30-2:00 is right for grand stuff ( shanks..), but really I am >looking at the part and seeing where the seam won't be affected too much. >You have some "clock settings" for me to double check?? > > This is my first action trying this rebushing method... Hope to HELL I'm >doing it right. I have been consistant in where I have been placing it on >all the parts.. depending on the part... uh-oh.... I am not really fluent at replacing bushings. AlI know is that placing the seam at 12:00 is not good. On the few bushings that I have had to replace, I place the seam the area you mentioned. Bill Spurlock has info describing the proper procedure, if I were to do a set; I would get the tools you have and the info from Bill (did Renner supply Bill's info with the tools?) You've gone this far, rebush the jacks. Jon Page ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/39/f7/1c/48/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC