John, thanks for your lead. Pianotek shows item FRP-146X as .129" diameter. Presuming these are the ones you mean; 1.) will they be a loose fit in the keyframe? 2.) I've just rebushed the keys,... I guess .002" of extra breathing room won't hurt.? BTW, hello from Ted Sambell, he wonders if you've attempted making a set of keys yet? thanks for your reply John. best regards, Mark Cramer -Original Message----- From: owner-caut@ptg.org [mailto:owner-caut@ptg.org]On Behalf Of John Hartman Sent: Monday, January 29, 2001 2:40 PM To: caut@ptg.org Subject: Re: .131" front-rail pins Pianotek has them. They also have the key spacer that fits. Mark Cramer wrote: > > I have an S&S keyframe circa 1988 with nasty nicks on the front rail pins, > the pin size is .131" but Steinway only shows .145" front rail pins. Where > can I source new .131" pins. > > BTW, thanks for the ongoing help in replacing the harpsichord string. I've > saved evryone's post, and one day will actually have to go and replace that > darned string! :>) > > Please help me recall that saying, " even the most elaborate plans must > eventually regress into actual work?" > > Mark Cramer, > Brandon University
This PTG archive page provided courtesy of Moy Piano Service, LLC