How about a complicated solution? I had mentioned previously the Kawai UST-7 (an otherwise amazing studio piano, IMHO) as being especially susceptable to this problem, and had several others echo the same findings. The irony is the UST (including 5's thru 8's) is built very well for moving in every other respect; superb steel frame, double wheel castors, etc. I had intended to ask Don Mannino if there was an awareness as to why the UST's rack so easily. I recall seeing creative back re-inforcement for back-post-less uprights, detailed on the PTJ reprint CD. It involved gusseting the back of the piano with a patterned sheet of plywood. The question remains whether the floor is the (greater) culprit, or the piano's cabinet? Has everyone re-acquainted (and re-glued) at least one old upright back to it's estranged cabinet sides? :>) Mark Cramer, Brandon University -----Original Message----- From: owner-caut@ptg.org [mailto:owner-caut@ptg.org]On Behalf Of kam544@flash.net Sent: Monday, April 09, 2001 3:33 PM To: caut@ptg.org Subject: need ideas Dear List, I recently have discovered a problem with unlevel floors in some university classrooms causing the pianos to go out of tune when moved only a few inches from the tuning location. Other than requesting the pianos not be moved, are there any other corrective measures or ideas that someone has employed with any success? Thank you, Keith McGavern, RPT Oklahoma Baptist University Saint Gregory's University Shawnee, Oklahoma, USA
This PTG archive page provided courtesy of Moy Piano Service, LLC