hammer thickness trimming jig, Uncle, Uncle!!!

[Barbara Richmond]

Will,

You crack me up.  Be sure to get a tripod, too.  ;-)

Barbara

-------------- Original message -------------- 
From: "Will Truitt" <surfdog at metrocast.net> 

> Barbara, 
> 
> I have been utterly overwhelmed by a sense of shame and guilt since you 
> posted this reply. I can't sleep at night. I've lost my zest for living! 
> :-{ 
> 
> My therapist told me that the only way I could resolve this inner conflict 
> would be to buy a digital camera. So I have ordered one. I'm feeling 
> better already! :-) 
> 
> I hope to be able to post pictures of my hammer tapering rig (for hammers 
> that are mounted on shanks) by next weekend for those of you who have 
> requested that I do so. 
> 
> Will Truitt 
> 
> 
> 
> -----Original Message----- 
> From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf 
> Of Barbara Richmond 
> Sent: Tuesday, August 26, 2008 11:01 PM 
> To: Pianotech List 
> Subject: Re: hammer thickness trimming jig, found mine! 
> 
> For crying out loud, Will, go out and spend a hundred bucks on a camera and 
> tripod. You probably don't even need to download any software, your windows 
> 
> program (if that's what you use) will most likely save the pictures when you 
> 
> plug in the USB cable that comes with the camera. Please use the tripod, 
> too--that will minimize any camera shake (=out of focus) and if you use the 
> camera's timer, there will be absolutely no shake and you can set up the 
> photo with your hands free to model in the picture ((holding the jig as it 
> glides through, etc.) When you have a good picture downloaded to the 
> computer, click on it, and somewhere you'll see an option to email it. If 
> you're sending a picture to me, please send the original, full size file and 
> 
> I'll edit it. If you're sending it to pianotech, you may choose the option 
> of a smaller file. 
> 
> Call me, I'd be happy to help. 
> 
> Barbara Richmond, RPT 
> Associate Journal Editor 
> 
> 
> 
> ----- Original Message ----- 
> From: "Will Truitt" 
> To: "'Pianotech List'" 
> Sent: Tuesday, August 26, 2008 7:05 PM 
> Subject: RE: hammer thickness trimming jig, found mine! 
> 
> 
> > Please forgive me for not offering you a photograph, I am one of those 
> > Luddites who still does not own a digital camera. 
> > 
> > 
> 
> 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080831/32343a2b/attachment.html