Hi Folks, I've got a pedal from an upright piano that has bent a bit, and is showing a small crack on the top of the pedal. I wonder what you all think about any efforts at hammering the pedal flat? Do you think I'm asking for trouble trying to remove the bend (I kind of think so as I feel like bending brass "back" will fatigue it even more). Secondarily, what would you think of trying to reinforce the pedal by adding a steel plate to the top of the pedal? Epoxy it to the brass? Thanks for any thoughts. -- William R. Monroe -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130110/1fde780b/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_1057.JPG Type: image/jpeg Size: 214915 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130110/1fde780b/attachment-0002.jpeg> -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_1058.JPG Type: image/jpeg Size: 169369 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130110/1fde780b/attachment-0003.jpeg>
This PTG archive page provided courtesy of Moy Piano Service, LLC