Thanks Isaac, I will contact them next week. I must remember the 4 hour difference in time. Cheers, John Ross Windsor, Nova Scotia On 2013-02-23, at 7:40 PM, Isaac Sadigursky <isaacspianoservice at gmail.com> wrote: > Hi, John! > Try to get in touch with 2 top player techs in Los Angeles > they might be able to help you; > Randy Cox 562-431-8338 > Vince Wikmur 949-977-1527.. > Good Luck! > Isaac Sadigursky, RPT > Los Angeles > > On Feb 23, 2013, at 3:38 PM, John Ross wrote: > >> It appears that I am looking for, either the dimensions to have one made, or replacement pulleys for a steamboat pump. >> John Ross >> Windsor, Nova Scotia >> >> Begin forwarded message: >> >>> From: John Ross <jrpiano at bellaliant.net> >>> Subject: Re Player Piano >>> Date: 23 February, 2013 5:49:01 PM AST >>> To: Pianotech List <pianotech at ptg.org> >>> >>> I have a Duo-Art Pianola, upright Weber piano, that was given to me. >>> I am intending to fix it up for my own use. >>> I have ran into my first problem, a major one. >>> It seems as if pot metal problems have been with us for a while. >>> The two pulleys, one on the motor and one on the pump, will disintegrate if I touch them. They are all swelled and cracked. >>> Is there a source for them? Obviously more specifics would be forthcoming. >>> One is double channelled, the other is triple channelled. >>> Any information would be appreciated. >>> John Ross >>> Windsor, Nova Scotia >>> >>> >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130223/4fff29fa/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC