> ...the block should be fit as if you weren't using epoxy... Why? I'm not suggesting that it not a good thing to get it close, but even if you left an inch gap and filled it with epoxy (good, very hard epoxy), why would that not be as ideal as a "perfect" fit with no epoxy, or only absolute minimal epoxy? Terry Farrell On Feb 3, 2013, at 11:00 AM, Jon Page wrote: > For The epoxy block/flange fit, I perfer to use Marine Tex Paste Epoxy for its incredibly high compression strength. However, the block should be fit as if you weren't using epoxy; the epoxy is overkill. > > -- > Regards, > > Jon Page >
This PTG archive page provided courtesy of Moy Piano Service, LLC