Screws are deep inside holding a block to the side wall. None of the others matter. It's a tight fit some mallet rapping will help but only once you get those out. Greg From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of tnrwim at aol.com Sent: Tuesday, September 25, 2012 4:18 PM To: pianotech at ptg.org Subject: [pianotech] restringing 1098 I'm in the process of removing the strings of a 1098. Although I can probably work around it, I would like to remove the bottom board. I've got the thing on it's back, and I've removed 6 screws, (3 in each end). But even using a mallet, I can't get the board off. Are these things glued in, and I just have to hit harder, or are there other screws I don't see? Wim -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120925/7db24907/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC